|
SP Diagnostics
Design and Manufacture of Products and Services for the Automotive Industry and AfterMarket
Press Release
For Immediate Release: Thursday 7th April 2011
NEW PRODUCT LAUNCHED: VAPOUR CHECK DIAGNOSTIC SMOKE UNIT
SP Diagnostics are proud to announce the latest addition to our automotive range, the Vapour Check.
The Vapour Check unit produces an OEM approved vapour from a specially formulated non-toxic, non-corrosive compound (UltraTraceUV®). The introduction of this smoke into a closed system in a vehicle will almost immediately pin-point any and all leaks, simply view the smoke exiting wherever there is a leak! In addition, you will see the UV fluorescent dye deposited at the exact location of a leak, all accomplished safely with the engine off!
The UV smoke-solution will last for hundreds of tests and is user refillable.
Features:
OEM approved diagnostic smoke machine
Uses special UV smoke tracer dye fluid
Simple one button operation
Fast setup and smoke generation
Detects numerous different types of leak
Non-Toxic and safe to use
Can use Nitrogen gas for testing EVAP systems
Only needs a connection to a 12V battery and an air line
Complete with UV lamp and viewing glasses
Saves time and money
Very economical (300 tests per bottle)
Functional Tests:
| EVAP Leaks |
This technology was specifically designed and is OEM approved for vehicles' EVAP systems. |
| Vacuum Leaks |
Hoses, lines, valves, diaphragms, choke pull-offs, heater controls, EGR hoses and controls. |
| Exhaust Leaks |
Manifold cracks, EGR valve feed tubes and passages, exhaust pipes, catalytic converters, boxes, heat control valves and crossover passages. |
| Oil Leaks |
Sump gasket, valve and cam cover gaskets, hoses and seals, cam and crankshaft seals, oil cooler and lines. |
| Under Dash Leaks |
HVAC hoses and tubes, control solenoids and diaphragms.
|
Brake Servo
System Leaks |
Hoses, check valves, diaphragm & chamber seals. |
| Turbo & Super Charger Leaks |
Seals, hoses, ducting, intercooler, housing seal and flange connector. |
Head Gasket
Leaks |
To adjacent cylinder, to cooling system, to atmosphere, etc.
|
Wind & Water
Leaks |
Around windscreen, windows, doors and sunroof seals.
|
| Component Testing |
Bench test water pumps and other components before installation. Test again after installation but before coolant and oil is added to the engine. |
Air Injection
System Leaks |
Control valves, diaphragms, solenoids, tubing, pump, vacuum controls and back pressure check valves. |
More Information: www.vapourcheck.co.uk
SP Diagnostics - Innovators & Manufacturers of Automotive Diagnostics
SP Diagnostics designs and manufactures, products and services for the automotive industry and aftermarket.
Based in the south west of England, we have over 100 years worth of combined experience in development, design and manufacture of automotive products, as a team we have worked on a complete range of products, both for the aftermarket and OEM customers.
Contact
SP Diagnostics, PO Box 3467, Chippenham, Wiltshire, SN15 9FH
Tel: 0845 601 6510
www.spdiagnostics.com
Contact: Tony Pizii on 0845 601 6510 |
News 
